When buying food grade silicone oil, first specify where it will be used: in food processing to control foam, or at an equipment lubrication point where incidental food contact is possible. These u......
2026-11-09Identify the units before comparing specifications Notation Direct equivalence Kinemati......
2026-11-09What silicone resins are and which supply forms and cure conditions matter for coatings Silicone resins are organosilicon polymers with branched or network structures based on siloxane bonds.......
2026-10-28Changing a diffusion pump from 704 to 705 and validating the fluid change Do not treat direct topping-up and mixing as the default changeover method. First confirm the pump manufacturer’s per......
2026-10-27Assessing ionic character and compatibility when silicone emulsion flocculates in an anionic finishing bath Pause scale-up and retain the supplied emulsion, process water and affected samples......
2026-10-27Why check cold startup and temperature control after switching a bath from methyl to phenyl silicone fluid Phenyl silicone fluid may suit some high-temperature baths, but better heat resistan......
2026-10-27Selecting release agents for moulded parts that will be printed, coated or bonded Include downstream requirements before comparing release performance. An intact demoulded part proves only th......
2026-10-22Selecting platinum catalysts and troubleshooting addition cure Platinum concentration alone is insufficient. First confirm an addition reaction between vinyl-functional and Si-H-functional si......
2026-10-21FVMQ selection for fuel seals at low temperatures and the role of fluorosilicone fluids Start with the part’s function. O-rings, gaskets, diaphragms and hoses need an elastomeric seal, so com......
2026-10-21Selecting and validating dimethyl silicone fluid when changing suppliers Matching viscosity is a useful starting point for screening alternatives, but it does not establish interchangeability......
2026-10-19Different processes for VTMO grafting onto PP and filler coupling and moisture cure These uses cannot share a single process of adding VTMO and waiting for moisture. In grafting, the vinyl grou......
2026-10-16Selecting and validating PHPS and organic polysilazane coatings for liquid cooling Define the cooling method and coating location before choosing a material. With cold-plate cooling, coatings......
2026-10-15Diagnosing and treating dust pickup after cleaning silicone rubber If silicone rubber quickly collects dust after washing, do not keep increasing the cleaner concentration. First look at how ......
2026-10-14Temperature resistance alone is not enough to select a fuel-system seal. With prolonged exposure to fuel, mineral oil, hydrocarbons or a specific solvent, the material also needs to retain its dimensi......
2026-10-13Why raw-material compliance alone is insufficient, and how to review volatiles, migration and the finished formulation. A compliant base polymer and a supplier document do not establish compl......
2026-10-13
